MKM85VVMG (System 4)
Brand: Daikin
-
Price: $4,680.00
Description :
INCLUDE INSTALLATION
FREE UPGRADE & UPSIZE INSTALLATION MATERIAL
FREE DISMANTLE & DISPOSAL OF OLD AIRCON SYSTEM
FREE 2 TRIP INSTALLATION
WARRANTY
5 year on compressor
1 year on other spare parts
1 year on workmanship
Price quoted is for HDB apartments only.
Additional charges may apply for private properties due to design layout & complexity in installation.
* Arrange for free site survey & get a quote.
Availability: In Stock
Available Options
AIRCON BUYING GUIDE...
- Use PSB certified quality material or material from reliable manufacturers for your installation work.
- Take steps to ensure that all copper pipes are PSB certified, of the correct size and thickness. Never ever replace copper pipings with Aluminium pipes.
- Choose the right thickness and class for your insulation tubes and be sure to check if they are PSB certified.
- Only engage the service of reputable contractors for quality assurance, even down to parts support.
- Choose the right spot to install the fan coil. This is to ensure that air flow distribution is even.
- The cooling capacity and model type are things to take into consideration, especially if you do not want to end up with an air-conditioning system that is either undersized or oversized.
- All else being equal, choose an inverter air-conditioning system over the viable alternatives so as to be energy efficient. On top of being environmentally friendly, you also stand to save on electric bills.
- Choose an aircon system that received an excellent energy efficiency rating under the Singapore Mandatory Energy Labelling Scheme.
- Use premium quality stainless steel brackets (Endorsed by Certified Engineer) for mounting your Condensing Unit.
How To Select The Right Cooling Capacity For Your Room?
It is very important to match the right cooling capacity of your air-conditioner against your room size.
Cooling capacity of air-conditioners are measured in BTUs (British Thermal Units).
BTU is the international measure for energy. A BTU is the amount of heat needed to raise 1 pound of water by 1 degree fahrenheit. In HVAC industry, BTUs measure the quantity of heat a conditioning unit can remove from a room per hour*.
*1 BTU per hour is equal to 0.293 watt-hour.
*1 watt is approximately 3.412 BTU per hour.
What happens if BTU rating is too high or too low?
A room installed with a higher BTU air-conditioner than it requires will cycle off the air too quickly, resulting in higher humidity levels in the room. On the other hand, a room installed a lower BTU air-conditioner will not be adequate enough to cool the room, and may take a much longer time to cool down.
How to calculate the correct BTU for your room?
Calculate the area by multiplying the length and width of the room. Refer to the table below for the required cooling capacity (BTU) for each room.
BTU CALCULATOR |
||
SQUARE METER |
SQUARE FEET |
BTU |
7 to 14 |
80 to 150 |
9,000 |
15 to 18 |
151 to 200 |
12,000 |
19 to 22 |
201 to 240 |
15,000 |
23 to 28 |
241 to 300 |
18,000 |
29 to 32 |
301 to 340 |
20,000 |
33 to 38 |
341 to 400 |
24,000 |
Disclaimer:
Notes
- Our sales consultant will call you to check for available installation dates. You will also be advised accordingly should any additional charges be incurred.
- In the event of complex installations, we will arrange for a site survey before setting up the installation dates.
- Stainless steel brackets and power points are not included.
- Installation works excludes dismantling and make good of any fittings, built-in wardrobe, cabinets, box up partitions, ceiling partitions, etc.
- Standard installation only.
- Refunds are not possible upon installation.
- Full payment must be made prior to the commencement of any installation work.
Installation...